TS-1XT

With a 20,000 Gauss field, the TS-1XT NSA-EPL listed degausser completely erases all data on hard drives and tapes in under 15 seconds. The TS-1XT comes with a SCAN-1X scanner and software package voucher to create an audit-worthy media destruction report as you degauss.

• Listed on the NSA/CSS Evaluated Products List for the erasure of Top Secret data
• Generates 20,000+ Gauss (2 Tesla) magnetic field for complete erasure of hard drives and tape
• Complete data elimination in 15 seconds
• LCD numerically displays the gauss level after each cycle
• Erases up to 1,295 (1.8 in.), 865 (2.5 in.), and 150 (3.5 in.) drives per hour
• SCAN-1X hard drive and tape destruction report software and scanner voucher included
• Upgradeable to IRONCLAD Erasure and Destruction Verification System
• Erases working and non-working hard drives
• Continuous duty – no cool down between cycles
• Certified to UL, IEC, CSA and CE standards
• TAA compliant
• Portable

Combine the TS-1XT degausser with Garner’s exclusive IRONCLAD® Erasure Verification with JPG Image Capture System for complete, permanent, and verifiable data elimination. Only Garner provides the best audit trail and proof-of-erasure reports with JPG images of degaussed hard drives and a record of Gauss field strength for each cycle.

Uniformly distributed 20,000-gauss power magnetically erases high-coercivity hard drives and tapes, ensuring Top-Secret classified data can never be recovered. The TS-1XT is the ultimate solution for the permanent erasure of all magnetic data.

• Physical destruction of hard drives alone leaves data behind (i.e. shredding, crushing, piercing, bending)
• The NSA-listed TS-1XT Degausser eliminates all data on the disc platters
• After degaussing, physical destruction from the PD-5 gives visual confirmation that the hard drive has been securely processed and is ready to leave the controlled environment for disposal or shredding

Note:  Solid-state media cannot be degaussed.  Physical destruction of the media with the Garner SSD-1 solid-state destroyer is recommended before the media leaving its secure environment.

Overwriting is a method where a random pattern of usually “1” and “0” is written to every part of the drive, frequently three times, to obliterate the underlying data.  The advantage of this method is the drive can be re-used.  The disadvantages are:  it takes a skilled operator to ensure the overwriting is done correctly; non-functioning sectors of the hard drive cannot be overwritten allowing data to remain on the drive; it takes a considerable amount of time-hours, and therefore electricity; and it is not regarded as failsafe, or permissible for the highest data security standards such as the NSA, CIA, or DoD.

Degaussing is the process of exposing the media to a strong magnetic field of sufficient strength to magnetically destroy the data.  The advantages of degaussing are:  a skilled operator is not required to operate a degausser; the magnetic field destroys all data on the drive in approximately 1/10 of a second regardless of whether the drive is functioning or non-functioning. Degaussing is recognized by the NSA and DoD as an appropriate method of secure data destruction.  The disadvantage of degaussing is the hard drive cannot be re-used.

After degaussing, the data on a degaussed hard drive simply no longer exists.

The TS-1XT will help you satisfy the most stringent data security standards, including:

• NSA/CSS/DoD Top Secret
• CCPA (California Consumer Privacy Act)
• GDPR (General Data Protection Regulation)
• GLBA (Gramm-Leach-Bliley Act)
• HIPAA (Health Information Portability and Accountability Act)
• IRS 1075
• NIST SP 800-88r1
• PCI DSS 3.2 (Payment Card Industry Data Security Standard)
• PIPEDA (Personal Information Protection and Electronic Documents Act)

To be added to the NSA/CSS Evaluated Products List (EPL), degaussers are laboratory tested to ensure complete erasure to the level required for the U.S. government classified top-secret data.

Garner Products, Inc., leads the data destruction industry in product safety by being the first and only U.S. hard drive degausser and destroyer manufacturer to earn certification of our products to UL, IEC, and CSA safety standards from a Nationally Recognized Testing Laboratory (NRTL).

Our products are also independently tested for conformity to CE standards for safety and emissions for the European Union.

These U.S. and international certifications identify Garner’s products as safe to operate in data centers, hospitals, offices, and other sensitive environments around the world. Garner’s products are certified to:

• UL
• IEC
• CSA
• ETL Listed

We are proud to be a manufacturer in California, the state that sets the standard for environmental protection. At every stage of the manufacturing process, from product design through manufacturing and shipping, we apply processes and use materials that minimize environmental impact.
Learn more

Whether you want to use the TS-1XT in an office, mount it on a rack, take it on the road, or do all three, we offer the options that make the TS-1XT the perfect fit. Create the ultimate in Top Secret data destruction by adding our NSA EPL-listed PD-4 Hard Drive Destroyer that bends, breaks, and mangles hard drives or our NSA  EPL-listed PD-5 Hard Drive and Solid-State Memory Destroyer that destroys magnetic, solid-state, solid-state hybrid, flash, and thumb drives.